Three discrete transistors to build an op amp

With three discrete transistors, an op amp with an open-loop gain greater than 1 million can be used (Figure 1). The output is biased at approximately half of the supply voltage by combining the Zener diode D1, the base-emitter voltage of input transistor Q1, and the 1V voltage drop across the 1MΩ feedback resistor R2.

Resistor R3 and capacitor C1 form a compensation network that prevents circuit oscillations. The values ​​in the figure still provide a good square wave response. The ratio of R2 to R1 determines the inverting gain, which is -10 in this example.

Figure 1. This AC-coupled inverting op amp has an open-loop gain of 1 million. The closed loop gain set by R1 and R2 is -10

Figure 1. This AC-coupled inverting op amp has an open-loop gain of 1 million. The closed loop gain set by R1 and R2 is -10

This op amp can be configured as an active filter or oscillator. It drives a 1 kΩ load. It has a good square wave response at 10 kHz and a 3 dB drop in output at 50 kHz. A 50 Hz low frequency response can be set with the input and output capacitor values. Faster transistors and careful layout can improve high frequency response.

ICU Room Bridge

ICU Bridge Type Ceiling-Mounted system,specially designed for intensive care rooms,the entire process wards, the recovery room.Supply flexible, first-rank nursing satisfy patient's separate treatment and nursing demand.Unique design lies in it all hides the electrical cable and pipeline in the ceiling-mounted arm.The modular design and multiple configurations.As clients' requirements,providing reasonable ICU Combination Ceiling-Mounted pendant (Apart Dry-Wet). Advanced spray technology, the intelligent combination of innovative ways to make the bridge pendant with diverse functions.

icu room birdge

Icu Room Bridge,Medical Pendant System,Manual Crane,Motorized Pendant

Shandong Lewin Medical Equipment Co., Ltd. , https://www.operatinglight.nl