For the printer equipment, although it is usually pay attention to maintenance, but can not guarantee that the printer will not have other faults, there will be some faults when starting up, in order to reduce the loss caused by the fault, let's take a look at the spray The printer manufacturer teaches you the troubleshooting knowledge.

The printer process startup process failure and treatment methods:

Insufficient ink, add ink

Check the liquid level detection electrode connection

Temperature failure changes the working environment

Viscosity fault check viscosity measuring line

Check the viscosity level change to confirm that the viscometer solenoid valve is working properly.

Additives are insufficient to add additives

Check if the additive added solenoid valve is working properly

Fan failure or insufficient compressed air check exhaust fan or compressed air

Knowing the processing methods described by the above printer manufacturers, I believe that every user who uses the printer will know how to deal with the malfunction of the printer.