Skillful topdressing to increase the yield of edible fungi

The consumption of nutrients in the culture material is exhausted during the peak period of the edible fungus and the late stage of the mushroom. In the two periods, timely application of fertilizer can significantly increase the yield of edible fungi and improve quality.

Manure soil. The fresh dry pig and cow dung are crushed, pre-wet piled with lime water for 15 days, and 50% fat mud and a small amount of grass ash are added and mixed. When the yield drops sharply or the dead mushroom appears, the old root is removed by combining the cleaning bed surface. Spread it on the bed.

Forage juice. Using the forage dried and dried grass, add 100 times water to frit the juice, and spray it after cooling to make the edible fungus grow robust.

Cottonseed juice. Add 10 times of decoction to the cottonseed, and add 3 times of water after cooling.

Pig, cow urine. The decomposed pig and bovine urine are boiled for 20 minutes, and the slag is filtered off, and 10 to 20 times of water is added to prepare a 5% to 10% dilution solution.

Food liquid. 1 soy water. Wash 10 kg of soybeans without mildew. After soaking, add 50-60 kg of water. After boiling, filter the soup and add water to 200 kg for spraying. 2 chop the 10 kg carrots, add 15 kg of water, cook for 30 minutes, filter the juice and add 3 times the water to make a 25% carrot juice spray. 3 Add 1 kg of solid glucose in 100 kg of water, and dissolve it to obtain 1% glucose solution, which can be directly sprayed. 4 Spray in 0.3 kg of water with 0.3-0.5 kg of salt.

Mushroom root soup. Take the mushroom root 5 to 10 kg, slightly clean, add 10 to 15 kg of water to boil for 15 minutes, take 50 kg of water and mix it, and spread it to promote the growth of the mushroom.

The above-mentioned various top dressing liquids are used in an amount of about 0.5 kg per square meter.

Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone

Surface Active Agent TC-2000

I. Company profile

Tiancheng Chemical Co., Ltd. is a collectivized high-tech multi-function fine chemical enterprise, integrated with science, industry, trade and research, which is mainly engaged in paper chemicals, Water Treatment Chemicals, rubber and plastic chemicals, agricultural pharmaceutical intermediates, basic chemical materials, food additives, detergent additives and electronic chemicals.

II. Technical indicators:

Appearance

Colorless and transparent liquid

Content

65%

pH value

4-5.5

Viscosity (25℃), mPa·s

≤20

III. Application fields:

1. In the field of electronic chemicals: the surfactant can be used in cleaning preparations of the electronic products, with the function of washing and electrostatic elimination.

2. In the filed of cosmetics, detergents, wool detergents: With the continuous improvement of people`s living standards, the demand for cosmetics, washing products and cleaning products is continuously increasing. As a monomer, the surfactant is applied to many fields, but also use with non-ion preparations jointly, with the function of penetration, humidification, washing and electrostatic elimination, providing help and support for improvement of people`s life and quality of life.

IV. Notes:

1. Storage condition: This product is stored in a cool and dry place (5-30 ℃) to prevent open-air exposure and freezing.

2. If the product storage temperature is below -15 ℃, there will be crystalline polamer. Before using, please heat and stir evenly, not affecting the product quality.

3. The product is slightly acidic. If it is accidentally into the eyes, please wash with water immediately.

V. Packing specification

250 kg plastic drum; IBC tons of barrel; Flexitank.

Surface Active Agent TC-2000

Surface Active Agent Tc-2000,Surface Active Agent,Electronic Chemicals

Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com