(1) Adjust the transposition method: replace the worn parts with one position, and continue to work by using parts that are not worn or lightly worn. (2) Repair Dimensions: Repair the damaged parts to change their geometrical dimensions, and add correspondingly changed parts to achieve the specified technical parameters. If the Dongfanghong 75(54) tractor's cylinder is worn out, the honing diameter can be increased by 0.25, 0.5, 0.75, 1.0 or 1.25 millimeters in accordance with the repair size, and correspondingly enlarged pistons and piston rings can be used. (3)Additional parts method: Use a special part to assemble to the worn part of the part to compensate for the wear of the part and restore its original matching relationship. (4) replacement parts and partial replacement method: When the parts are damaged to be repaired or repair costs are too high, the replacement of new parts; if a part of the part is partially damaged, the damaged part can be removed, re-create a new In part, the new replacement part is connected to the base part of the original part by welding or other methods to form an integral part, thereby restoring the working ability of the part. (5) Restoration size method: The damaged parts are restored to the technical specifications specified by the welding (electric welding, gas welding, brazing), electroplating, spraying, rubber replenishing, forging, pressing, car, pliers, heat treatment and other methods. And performance. The economics of this method must be taken into account. The cost of a typical repair part is about 5 to 50% of the original price. Matters needing attention: can not destroy the accuracy of the shape of parts; can not reduce the hardness and wear resistance of the surface of the parts; can not make the metal matrix of the parts change and produce harmful residual forces, can not affect the processing of the parts after repair.
Date tree are mainly planted in ningxa, shanxi, gansu etc provinces of northwest China. D
Date flower honey is rich in fructose, vitamins C and mieral substance(Iron and copper).
The date flower blooming time is depend on the various kinds of date trees. Usually the blooming time is during June and July, 25-30 days.
The Chinese date taste is very good and good for your healthy. Would you like to try?
Dateflower Honey,Raw Pure Dateflower Honey,Wholesale Dateflower Honey Ningxia Natural Honey Product Technology And Development Co., Ltd. , https://www.nxhoney.com
Agricultural machinery parts commonly used repair technology