This reagent is for research use only: This kit is used to determine the content of human growth-regulated oncogene γ/melanoma growth stimulating factor (CXCL3/GROγ) in human serum, plasma and related liquid samples. Experimental principle : The kit uses a double antibody sandwich assay to determine the level of human growth-regulated oncogene γ/melanoma growth stimulating factor (CXCL3/GROγ) in the specimen. The purified human growth-regulated oncogene γ/melanoma growth stimulating factor (CXCL3/GROγ) antibody was coated on the microplate to prepare a solid phase antibody, and the growth-regulated oncogene γ was sequentially added to the microwell of the coated monoclonal antibody. Melanoma growth stimulating factor (CXCL3/GROγ), which is combined with HRP-labeled growth-regulated oncogene γ/melanoma growth stimulating factor (CXCL3/GROγ) antibody to form an antibody-antigen-enzyme-labeled antibody complex. After washing, the substrate TMB was added to develop color. TMB is converted to blue under the catalysis of HRP enzyme and converted to the final yellow color by the action of an acid. The color depth is positively correlated with the growth-regulated oncogene γ/melanoma growth stimulating factor (CXCL3/GROγ) in the sample. The absorbance (OD value) was measured by a microplate reader at a wavelength of 450 nm, and the content of human growth-regulated oncogene γ/melanoma growth stimulating factor (CXCL3/GROγ) in the sample was calculated by a standard curve. Kit composition : Kit composition 48 hole configuration 96-well configuration save Instruction manual 1 copy 1 copy Sealing film 2 pieces (48) 2 pieces (96) sealed bag 1 1 Enzyme label coated plate 1×48 1×96 Store at 2-8 ° C Standard: 270 ng/L 0.5ml × 1 bottle 0.5ml × 1 bottle Store at 2-8 ° C Standard dilution 1.5ml × 1 bottle 1.5ml × 1 bottle Store at 2-8 ° C Enzyme standard reagent 3 ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ° C Sample diluent 3 ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ° C Developer A solution 3 ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ° C Developer B solution 3 ml × 1 bottle 6 ml × 1 bottle Store at 2-8 ° C Stop solution 3ml × 1 bottle 6ml × 1 bottle Store at 2-8 ° C Concentrated washing solution (20ml × 20 times) × 1 bottle (20ml × 30 times) × 1 bottle Store at 2-8 ° C Sample processing and requirements : 1. Serum: The blood is naturally coagulated for 10-20 minutes at room temperature and centrifuged for about 20 minutes (2000-3000 rpm). The supernatant is carefully collected, and if precipitation occurs during storage, it should be centrifuged again. 2. Plasma: EDTA or sodium citrate should be selected as an anticoagulant according to the requirements of the specimen. After mixing for 10-20 minutes, centrifuge for about 20 minutes (2000-3000 rpm). The supernatant is carefully collected, and if a precipitate forms during storage, it should be centrifuged again. 3. Urine: Collect with a sterile tube and centrifuge for about 20 minutes (2000-3000 rpm). The supernatant is carefully collected, and if a precipitate forms during storage, it should be centrifuged again. The chest and ascites and cerebrospinal fluid are referred to. 4. Cell culture supernatant: When detecting secreted components, collect them in a sterile tube. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. When the components in the cells were detected, the cell suspension was diluted with PBS (pH 7.2-7.4), and the cell concentration reached about 1 million/ml. By repeated freezing and thawing, the cells are destroyed and the intracellular components are released. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again. 5. Tissue specimen: After cutting the specimen, weigh the weight. Add a certain amount of PBS, pH 7.4. It was quickly frozen and stored in liquid nitrogen for use. The specimen still maintains a temperature of 2-8 ° C after melting. A certain amount of PBS (pH 7.4) was added, and the specimen was homogenized by hand or homogenizer. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. One part of the package is to be tested, and the rest is frozen for use. 6. The specimens should be extracted as soon as possible after collection, and the extraction should be carried out according to the relevant literature. The experiment should be carried out as soon as possible after extraction. If the test cannot be performed immediately, the specimen can be stored at -20 °C, but repeated freezing and thawing should be avoided. 7. Samples containing NaN3 cannot be detected because NaN3 inhibits horseradish peroxidase (HRP) activity. Steps Precautions: 10. In the case of an English manual, the English manual shall prevail. Calculation : Taking the concentration of the standard as the abscissa and the OD as the ordinate, draw a standard curve on the coordinate paper, and find the corresponding concentration from the standard curve according to the OD value of the sample; multiply by the dilution factor; or use the concentration of the standard Calculate the linear regression equation of the standard curve with the OD value, substitute the OD value of the sample into the equation, calculate the sample concentration, and multiply by the dilution factor, which is the actual concentration of the sample. Kit performance: 1. The linear regression coefficient of the sample and the expected concentration correlation coefficient R value is 0.990 or more. 2. Within and within the batch should be less than 9% and 11% respectively examination range: 7ng/L-260ng/L Storage conditions and expiration date: 1. Kit storage: 2-8 ° C. 2. Validity: 6 months Greenhouse Drip Irrigation System Fertigation is using your irrigator to fertilise the plants and soils as you water, which is the most efficient and advanced practice of fertilization. Aid of pressure system (or natural divide terrain), the soluble solid or liquid fertilizer, according to the soil nutrient content and crop fertilizer regularity and characteristics of species, with the fat of with irrigation water, through a controlled water supply pipeline system, supplying, the compatibility, water through the pipe and drop head form drip irrigation, uniform, regular, quantitative, infiltration area crop root growth and development, make the main root soil always stay loose and appropriate moisture content, at the same time according to different crop fertilizer characteristics, environment and soil nutrient content in soil; Crops in different growth phase water requirement, the different development stages of the fertilizer rule is the demand of design, the water and nutrient timing quantitative, provided directly in proportion to the crops. Greenhouse Drip Irrigation System,Greenhouse Micro Irrigation System ,Plant Drip Irrigation JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.engreenhouse.com
Human Growth Regulatory Oncogene γ (CXCL3/GROγ) ELISA Kit Procedure