Cultivation Techniques of Spring Watermelon Planting

First, the later management of the seedlings

Mainly grasp the three ring agricultural knowledge festivals of humidity, disease prevention and temperature control. According to the situation of most town nurseries, the general humidity in the greenhouse is too high. The method of dehumidification: one is to sprinkle some pre-prepared thousand fine mud; the other is to uncover the small clear film. Disease prevention and control: The focus is on cross-spraying fungi, to prevent and cure rickets, and other disease control refers to the total 107 technical requirements. Temperature control, in the later stage should pay attention to control at around 20 °C as well.

Second, the preparation work before the transplanting of Daejeon

1. Till the land, apply enough base fertilizer, and do a good job. Generally, 20-30 ton of organic fertilizer is applied to each standard, 50 kg of compound organic fertilizer, 50 kg of phosphate fertilizer, and 3 kg of bio-clamp 1 are fully ploughed and mixed, and the hoe is prepared according to the cultivation requirements.

2.趁 No wind or small wind weather, cover the greenhouse film, and prepare a small ring shed ring and covered nylon, covered with mulch on the hoe (preferably black mulch). Under normal circumstances, the door to the north of the greenhouse should be sealed to ensure the temperature.

3. The shed is surrounded by three ditch.

Third, the seedlings are planted

When the seedlings are in the heart of 2-3 leaves, they can be colonized (the general age is controlled at 30-40 days). On the hoe, 30-35 cm of the plant is punctured and punctured, and two stalks are generally planted in the greenhouse. After planting, the root water was poured with 3% urea solution, and the planting mouth was sealed. On the planting ridge, a small layer of small arches of 30-40 cm high and 50-120 cm is used for heat preservation, which is good for living trees.

Fourth, management requirements

1. Make sure the temperature. The temperature after transplanting should be guaranteed at around 30-35 °C. In the method, the temperature is maintained by the greenhouse film, the small ring shed cover film, and the mulch film. When the temperature is extremely low, the straw shed or the non-woven fabric is covered with frost and temperature.

2. Make sure you are at room temperature. After living the tree, pay attention to the temperature at noon from the noon temperature of 35 ° C, the method can uncover the ring film. If the temperature does not drop, you can consider re-opening the south gate of the greenhouse.

3. Timely topdressing. When the vine grows to 50 cm (usually after the end of March), it is ditched on both sides of the melon root 50 cm (see self-root), and the compound fertilizer or cake fertilizer is applied. It is best to use special fertilizer such as glutinous rice, and cover the soil. Leveling.

4. Grasp the whole branch. Prevent the grow up. Generally, 2-3 vines per plant (depending on the density of transplanting), this is the key to the success of spring cantaloupe planting, and the remaining side branches must be determined to cut off all. Sprinkle the small arch shed before and after the summer (the vine has reached the side).

5. Artificial pollination. At 6-10 am on a sunny day, pick and grow the male flowers with good pollen, remove the petals, gently spread evenly on the male flower head, and make a mark.

6. Choose melon and melon. Choose about 14 leaves of melon, each plant only one melon, in order to facilitate early maturity and strong.

7. Apply fertilizer to the fruit. One week after the first batch of melons, the fruit fertilizer can be applied, and urea can be used. Then, spray 0.5% dihydrogen phosphate solution every 7 days, keep the soil moist, and control the water one week before harvest to improve the quality.

8. Pest control. It is necessary to regularly control spermatozoa and the viral diseases caused by it.

Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone

Pet Quantum Analyzer


What is the pet scanner?

[Pet Scanner] involves high-tech innovation projects of medicine, bio-informatics, electrical engineering and other sciences. Using the quantum medicine as the theoretical basis, it applies the advanced electronic equipment to collect the weak magnetic field of animal cells for scientific analysis, thereby analyzing and determining the tested animal's health status and main problems and


putting forward standard prevention recommendations. [Pet scanner] is individualized guide of health care consultation for full animal body and forward health science, and has the advantages of completeness, non-invasiveness, practicality, simplicity, fastness, economy, easy popularization, etc. With the depth and development of scientific research, it will make a greater contribution for the cause of animal health, having a broad development and application prospect.

Principle of quantum analyzer:

The animal body is the aggregates of a large number of cells which are in continuous growth, development, differentiation, regeneration and apoptosis, and the cells constantly self-renew through its own division. In the process of cell division and growth, those charged bodies of atomic nucleuses constituting atoms as the basic unit of cell and the electrons outside the nucleus are in constant high-speed movement and changing, thereby constantly emitting electromagnetic waves.

The electromagnetic wave signals emitted by the animal body represent the specific state of the animal body, and the emitted electromagnetic wave signals are different under the different conditions of the human body, such as health, sub-health, disease, etc. If we can determine these specific electromagnetic wave signals, we can determine the status of the body's life.

Quantum medicine considers that the most fundamental reason of falling sick is that the spin of electrons outside the atomic nucleus and the orbit change, thereby causing the change of atoms constituting a material, the change of small biomolecules, the change of big biomolecules, the change of all the cells and finally the change of organs. Because the electron is a charged body,

when the spin of electrons outside the atomic nucleus and the orbit change, the electromagnetic wave emitted by the atoms will change. The energy o f the electromagnetic wave changes caused by the changes of the animal body's diseases and physical changes in the nutritional status is extremely weak and usually is only nano gauss to microgauss. The frequency and energy of the

weak magnetic field of hair determined directly or by holding a sensor compare with the resonance spectra of standard quantum of diseases and nutrition indicators set in the instrument after the frequency and energy are amplified by the instrument and processed by the computer, and then the corresponding quantum value being from negative to positive is output. The size of the

quantum value indicates the nature and extent of the disease and the nutrition levels. Finally, the test results are resolved by clinicians. It's similar to the principle of listening to broadcasting from the radio. There are many radio waves in the air. If you want to listen to some designated broadcasting, you can transfer the radio to the corresponding frequency, at this moment, resonance occurs, so that you can listen to this broadcasting. Quantum resonance uses this principle for testing.

pet quantum analyzer


pet scanner

pet quantum scanner

pet quantum testing result


Animal Quantum Analyzer, Dog Quantum, Cat Quantum

Shenzhen Guangyang Zhongkang Technology Co., Ltd. , https://www.nirlighttherapy.com