With the rapid development of greenhouse cultivation, the application of greenhouse electric roller blinds has become more and more popular, and will become the necessary mechanical equipment for greenhouse cultivation in the future. But how to use the roller blind machine to save labor, labor, safety and efficiency? Safety is always first. The following are the ten points of safe use of the roller blind machine.

The following ten safety issues should be noted when using the roller blind machine:

1. According to the length, width, arching degree of the greenhouse and the weight of the straw curtain, select the appropriate host according to the standard, pay attention to leave the load margin, prohibit the full load and overload operation, and take necessary safety anti-theft measures for the motor.
2. Straight-tooth roller blinds When the power is cut off, it is strictly forbidden for the user to pick up the brake block and let the roller blind machine slide down by itself, otherwise it will be life-threatening. The pull-up roller blinds should be equipped with a remote control to stop the machine immediately when the body or clothes are "bitten".
3. According to the weight of the roller blind, the pole, the push rod, the roller rod and the bolt are used according to the standard to avoid the arbitrarily causing the folding rod and the screw rod. During the startup and operation of the mainframe, it is strictly forbidden to stand in front of the main engine and the reel, in case the roller blind machine loses control and causes personal safety accidents.
4. It is forbidden to fix the reverse switch on the main unit and the pole. To stay away from the main unit, operate on the back wall or on both sides of the mountain. And control the knife gate in front of the reverse switch to ensure that the power can be cut off in time when the reverse switch fails.
5. When the main unit is used for the first time, be sure to add enough qualified heavy-duty gear oil, check it regularly and replace it once a year.
6. In the event of a failure of the roller blind machine, the fault should be eliminated under the assistance or guidance of the agent or the company's service personnel to avoid a blind accident and cause a safety accident.
7. During the installation and use, if there is a deviation between the pole and the coil, the bolt should be adjusted, straightened and tightened in time to ensure the normal operation of the mainframe and the rod and prolong the service life.
8. When the roller blinder is reeled, it is forbidden to touch the V-belt. After the roller blinder is wound up, it should be shut down in time to prevent the straw curtain from turning over the shed.
9. In case of rain or snow, cover the rain film to prevent the curtain from getting wet and causing damage to the main unit and the motor.
10. Motors, cables and other power distribution equipment purchased by users shall be qualified products that meet national standards to ensure safe operation of electricity and safe operation of the host.