Screw air compressors often encounter overheating problems, mainly due to excessively high exhaust gas temperature and hot running parts of the screw air compressor. Here are some questions about why the screw air compressor is overheated by Zhongshan Shunli Xiaobian:

First, environmental factors

In many cases, it has a great influence on the ventilation and heat dissipation. The main factors affecting the heat dissipation around the air compressor are the following three phenomena: the distance placed by the air compressor is too close to the wall or other obstacles; There may be other sources of heat. For this reason, it is recommended to install and use the air compressor strictly in accordance with the installation and use environment requirements of the screw air compressor.

Second, the radiator blockage factor

Because it may be caused by a lot of dust around the screw air compressor, it will cause long-term operation and cause a layer of dust or sludge to adhere to the surface of the radiator, which will affect the heat dissipation effect. If the oil filter is too dirty, it may cause a certain degree of overheating of the air compressor. Because the oil filter of the screw air compressor will make the oil unable to enter the air compressor at normal flow rate due to too dirty, the screw air compressor will rapidly heat up due to insufficient cooling oil. Of course, there is also a cooling oil level that is too low. It is recommended that the screw air compressor be regularly maintained and maintained to avoid this.

Third, due to low oil label or poor oil quality

    The screw air compressor should use the original manufacturer's special air compressor oil. If other low-grade or inferior oil is used, the viscosity and the specific heat may not reach the standard and the temperature will be too high.

Xiamen Chuanye Machinery Co., Ltd. http:// specializes in air compressors, screw air compressors, oil-free air compressors, piston air compressors, dryers, gas storage tanks, energy-saving inverter compression in Xiamen, Fujian. Machine machine agent, parts sales and maintenance and after-sales service in one company