Enzymes are playing more and more important role in the current dyeing & washing manufacturers, both in developing new fashions, and in terms of improving basic textile process. From pre-treatment to finishing, Sunson has a range of enzymes that brings innovative and competitive solutions to meet the need of our customers, and help textile manufacturers to produce high-quality fabrics in an efficient and environmental-friendly way.Our advantages: Textile Enzymes,Bacterial Alpha-Amylase,Industrial Enzyme For Textiles,High Activity Textile Enzymes Sunson Industry Group Co., Ltd , http://www.sunsonchinaenzymes.com
â— Improved fabric quality
â— Reduced processing costs
â— Increased profitability and competitiveness
â— Environmental-friendly
Sunson offers a variety of enzymes for textile industries for various purpose as below.
Product
Acid Cellulase
Neutral Cellulase
Alpha Amylase
Catalase
Laccase
How to maintain the new purchase of agricultural vehicles
Test preparation: After arriving at home, the new car will be drained and cleaned of fuel tank, gearbox, and rear axle, replaced with clean fuel, lubricating oil, and cooling water, and added as required. Carefully check: Check whether the operating mechanism is flexible and reliable. Whether the fasteners of the solids, especially the front and rear axles, are tightened. For the loose parts, it should be firm according to the specification; Check whether the shifter is in the neutral position, if not In the neutral position, the clutch pedal should be depressed and the shift lever should be placed in neutral. Vehicles with self-dumping devices should check the handle of the dumper according to the requirements of the instructions and place it in a separate position. Smart start: After everything is checked, turn on the fuel switch and turn on the oil circuit. After the engine is started, it needs to run at a low speed for a period of time, so that the water temperature can rise to about 50 degrees to start a walker. Generally, the warm-up time is 3-5 minutes. Run-in adjustment: Newly-purchased agricultural vehicles must be put into use after running-in. The running road requires a small gradient, the road surface is flat, the load is light to heavy, the use of gears from low to high level by level, all levels must be run-in, common grades and more run-in. During the running-in period, the clutch, brake, and other working devices must be consciously used for a certain period of time. At the same time pay attention to the working conditions of each part and make necessary adjustments to the parts that need to be adjusted. Cleaning and oil change: After the running-in is completed, all the lubricating oil must be cleaned and replaced. The oil changing procedure and method are: firstly replace the engine lubricating oil; after parking, the gear oil of the transmission gear and the rear car shell is released while hot, and the appropriate amount of diesel oil is added; 2-3 minutes. Clean it, then clean the diesel used for cleaning, and finally add the corresponding new lubricant to each part.